Oce PlotWave 350 - Ipv6 Settings

IPv6 settings
Introduction
In case IPv6 is enabled, the user can change some of the IPv6 settings.
IPv6 settings
The following settings are available for IPv6:
•
'IPv6 manual address'. The IPv6 address when set manually. Enter the value “::” or
“0:0:0:0:0:0:0:0” to disable a manual IPv6 address.
•
'IPv6 manual gateway address'. The IPv6 manual gateway address when set manually.
Enter the value “::” or “0:0:0:0:0:0:0:0” to disable a manual gateway
Chapter 4 - Define your workflow with the Océ Express WebTools132
IPv6 settings