Oce PlotWave 350 - Media Roll Management

Replace the media
The media drawer
Illustration
1
2
3
5
4
Component - function table
#
Description / FunctionComponentNo.
Carries the media rollroll holder1
media roll 12
+ Calibration paper boxmedia roll 2 (optional)3
Groove integrated behind the front cover
of the media drawer.
roll loading station4
This button is used to trim a strip of a new
or damaged media roll.
clean cut button5
Note:
The scanner calibration sheet for the 'Océ Scanner Express' is located in the media
drawer at the rear of roll 2.
Chapter 6 - Maintain the printing system 291
The media drawer