Use the Océ PostScript
®
3 Driver to send a print job
Introduction
Océ provides the Océ PostScript
®
3 Driver that allows you to send print jobs to your
Océ PlotWave 350.
Note:
You need a license to be able to print PostScript
®
files on the Océ PlotWave 350.
Refer to driver specifications on page 364 to get the list of supported operating systems
and environments.
Illustration
How to use the Océ PostScript
®
3 Driver to send a print job
#
RemarksActionStep
Open the file that you want to
print in the source application.
1
From the 'File' menu of the ap-
plication, click 'Print'.
2
Select the Océ PlotWave 350 in
the 'Printer' area of the 'Print'
dialog box.
3
When you select Properties you can make
settings for the print job.
Click 'Properties' and 'Ad-
vanced'.
4
Chapter 3 - Quick start 77
Use the Océ PostScript
®
3 Driver to send a print job
To Next Page
Loading...
Need help?
General
