The Océ Express WebTools
Introduction
The Océ Express WebTools is an application that runs embedded on the Océ PlotWave
350. You can use an Internet browser (Microsoft
®
Internet Explorer 6.0 (or higher) or
Mozilla Firefox™ 2.0 (or higher) to open the home page of the Océ Express WebTools.
Definition
You can use the Océ Express WebTools to do the following.
•
Send print jobs to your Océ PlotWave 350 with Océ Publisher Express.
•
Access the settings to manage the configuration and preferences of the printing system.
To change settings in the Océ Express WebTools you must log in using one of three
predefined user roles because the settings are all password protected. (see ‘User roles
and authorizations’ on page 125)
•
Monitor the status of the printing system.
How to access the Océ Express WebTools
To access the Océ Express WebTools do the following.
•
Enter the Océ PlotWave 350 Hostname (for example http://OcePlotWave) in the
workstation web browser.
or
•
Enter the Océ PlotWave 350 IP address (for example http://192.168.1.123) in the
workstation web browser.
Note:
If the Océ Express WebTools do not appear, contact the network administrator to check
the network parameters. Check if the Océ PlotWave 350 network settings have been
registered in the network infrastructure.
Chapter 3 - Quick start64
The Océ Express WebTools
To Next Page
Loading...
Need help?
General
