Print from a USB device
Print from a USB mass storage device or flash drive
1.
Insert USB mass storage device or flash drive into the USB port on the user panel.
2.
The system automatically selects the Print tab.
Note:
When the first template in the Scan tab is a Scan to USB template, the system selects the
Scan tab.
3.
Open the Print tab with the confirmation button above the scroll wheel.
The contents of your USB device is displayed.
4.
Use the scroll wheel to browse to the file you want to print. You can select or deselect
the desired file with the confirmation button.
You can also select multiple files:
•
Press 'Select all' when you want to print all the files from a folder.
•
Press 'Select more...'. Use the scroll wheel to browse to the desired files with scroll
wheel. You can select or deselect the files with the confirmation button.
Note:
You can only select multiple files from one folder.
5.
If necessary, you can edit the settings of your job with the lower right softkey.
6.
Use the green button to start printing.
Chapter 5 - Use the printing system204
Print from a USB mass storage device or flash drive
To Next Page
Loading...
Need help?
General
