Define the default output quality for scan jobs
Introduction
The Océ Express WebTools offers settings to optimize the default output quality for scan
jobs. You can define a default output quality for each scan job template.
You can find these settings in the 'Preferences' - 'Scan job defaults' tab.
Note:
Before you can edit a setting or a settings group, you must log on as a Key operator.
Original type when scanning to grayscale, black-and-white or color
The quality of the scanned file is optimized based on the type of the original that is
scanned.
#
DescriptionValues
'Line/text' is advised for line drawings and design drawings.
Lines and text are optimized, a light background is compensated.
'Line/text'
'Colored original' is the advised value for colored originals like
maps, 3D-CAD drawings, consumer graphics or rasterized
photos.
The output is optimized for the reproduction of the color infor-
mation. The system compensates for a gray background and
for light wrinkles.
'Colored original'
'Photo' is the advised value for photos.
The output quality is high.
'Photo'
'Blueprint' is the advised value for blueprints.
The information on the original is inverted. White lines will be
black, the blue background will be white.
'Blueprint'
'Dark original' is the advised value for originals with a dark
background.
The output is optimized especially for dark transparent originals.
The system compensates for the dark background and the actual
information on the original is optimized.
'Dark original'
'Folded line/text' is the advised value for originals that have
been folded.
Lines and text are optimized, while the folds are suppressed.
'Folded line/text'
Chapter 4 - Define your workflow with the Océ Express WebTools170
Define the default output quality for scan jobs
To Next Page
Loading...
Need help?
General
