Oce PlotWave 350 - Page 226

FunctionSettings valuesSetting
The location to deposit the sheet face-up.'Back output'
Settings group: 'Sheet size'
#
FunctionSettings valuesSetting
'Determines the cut size of the print.
'Standard': the print is cut to a standard
media size (DIN, ANSI, ...). 'Synchro':
the print length depends on the image.'
'Synchro'
'Standard'
'Cut method'
'Adds a blank strip at the beginning of
the output.'
0 to 400 mm'Add leading
strip'
'Adds a blank strip at the bottom of the
output.'
0 to 400 mm'Add trailing
strip'
Chapter 5 - Use the printing system226
Available settings for copy jobs