Oce PlotWave 350 - Page 229

FunctionSettings valuesSetting
'The vertical offset where the erase area
starts.'
0 to 6000 mm'Vert offset'
'The width of the area to erase.'0 to 914 mm'Width'
'The length of the area to erase.'0 to 6000 mm'Length'
Settings group: 'Stamp'
#
FunctionSettings valuesSetting
Copy with a stampNone
------
'Stamp'
'The position of the stamp inside the leg-
end.'
'Top'
'Middle'
'Bottom'
'Position'
Chapter 5 - Use the printing system 229
Available settings for copy jobs