Note:
With a scan template you can pre-define the settings you need for a scan job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see ‘Define the scan job preferences and
scan templates’ on page 167).
5.
Press the green button.
Note:
Depending on the selected 'Original release mode' in the Océ Express WebTools, the
scanner holds or releases the original after the scan procedure.
Result
The scanned PDF file is placed in the Smart Inbox 'Scans'. You can access this Smart
Inbox via the'Jobs' tab in the Océ Express WebTools.
Chapter 3 - Quick start92
Scan a CAD drawing to color PDF
To Next Page
Loading...
Need help?
General
