2
Before making copies
2-46 d-Color MF25
5 Load the paper into the tray so that
the side of the paper to be printed on
(the side facing up when the package
was unwrapped) faces up.
– Load letterhead paper so that the
side to be printed on faces down.
?
How is curled paper loaded?
% Flatten the paper before loading
it.
?
How many sheets of paper and other media can be loaded?
% No more than 250 sheets of plain paper can be loaded. No more
than 20 sheets of thick paper, overhead projector transparencies,
postcards, label sheets or envelopes can be loaded.
% Do not load so many sheets of plain paper that the top of the stack
is higher than the , mark.
6 Close the 1st tray.
– If envelopes are loaded, continue with step 7.
7 Pull up the upper right-side door re-
lease lever, and then open the upper
right-side door.
8 Push up the fusing unit cover.
, mark
To Next Page
Loading...
Need help?
General