5
Troubleshooting
5-30 d-Color MF25
5 Turn misfeed-clearing dial 1 clock-
wise until the removal indicator is
completely blue.
?
What should be done if the mis-
feed-clearing dial 1 is turned too
far?
% Turn the misfeed-clearing dial 1
counterclockwise to finely adjust
it.
6 Open the upper door of the finisher,
and then pull out any paper in the
feed section.
7 Close the upper door.
8 Remove all paper fed into the exit
tray 1.
9 Open the misfeed-clearing guide for
the finisher, and then remove any
misfed paper.
Removal
Misfeed-
clearing
dial 1
indicator
To Next Page
Loading...
Need help?
General