Utility
12
d-Color MF25 12-37
Image Stabilization Perform an image stabilization if the im-
age is incorrect, even after the gradation
levels have been adjusted.
• Image Stabilization Only:
Perform normal image stabilization.
• Initialize + Image Stabilization:
Select when a good result was not
achieved after “Image Stabilization
Only” was selected.
–
Color Reg-
istration
Adjust
Color Reg-
istration
Adjust
(Yellow)
Adjust the color registration if color shifts
can be seen in the print result.
–
Color Reg-
istration
Adjust
(Magenta)
–
Color Reg-
istration
Adjust (Cy-
an)
–
Gradation
Adjust-
ment
Copy Adjust the gradation if there are changes
in the color gradations of the print image.
The adjustment is made with stress on
increasing the number of images stored
in the memory.
–
Printer
(Gradation)
Adjust the gradation if there are changes
in the color gradations of the print image.
The adjustment is made with stress on
the gradations in images.
–
Printer
(Resolu-
tion)
Adjust the gradation if there are changes
in the color gradations of the print image.
The adjustment is made with stress on
the reproducibility of text and lines.
–
Scanner
Adjust-
ment
Leading
Edge Ad-
justment
The starting scanning position (document feed direction) of the doc-
ument can be adjusted. For details on making this adjustment, con-
tact your technical representative.
Centering The starting scanning position (transverse document feed direction)
of the document can be adjusted. For details on making this adjust-
ment, contact your technical representative.
Horizontal
Adjust-
ment
If the copy image is distorted (stretched or compressed), the zoom
ratio in the transverse document feed direction for the scanner can
be adjusted. For details on making this adjustment, contact your
technical representative.
Vertical
Adjust-
ment
If the copy image is distorted (stretched or compressed), the zoom
ratio in the document feed direction for the scanner can be adjusted.
For details on making this adjustment, contact your technical repre-
sentative.
Parameter Description Default Setting
To Next Page
Loading...
Need help?
General