Utility
12
d-Color MF25 12-81
– To separately specify the maximum number of color and black
prints allowed, touch [Individual Allowance].
20 Touch [No Limit] or [Limit].
21 Using the keypad, type in the maximum number allowed.
– If “Individual Allowance” was selected, touch [Edit] beside the print
mode set to “Limit”, and then use the keypad to type in the maxi-
mum number allowed.
– Touch [All Users] to apply the settings in the current screen to all
registered users. Touch [All Users], and then touch [OK] in the two
screens that appear to display a message and apply the settings to
all users. At this time, do not turn off the machine with the main
power switch.
22 Touch [OK].
The maximum number of prints allowed are set.
23 Touch [Function Permission].
The Function Permission screen appears.
24 Touch the button for the desired setting for each operation.
– To permit the operation to be performed, touch [Allow].
– To prohibit the operation to be performed, touch [Restrict].
To Next Page
Loading...
Need help?
General