12
Utility
12-80 d-Color MF25
– Touch [All Users] to apply the settings in the current screen to all
registered users. Touch [All Users], and then touch [OK] in the two
screens that appear to display a message and apply the settings to
all users. At this time, do not turn off the machine with the main
power switch.
– If “Color” is set to “Restrict”, printing is not possible with the “Full
Color”, “2 Color” or “Single Color” settings.
– If “Black” is set to “Restrict”, printing is not possible with the
“Black” setting.
– If both “Color” and “Black” are set to “Restrict”, the message
“Copy is prohibited.” appears if authentication was completed cor-
rectly.
17 Touch [OK].
The output permissions are set.
18 Touch [Max. Allowance Set].
The Max. Allowance Set screen appears.
19 Touch [Total Allowance] or [Individual Allowance].
– To specify the maximum number of combined color and black
prints allowed, touch [Total Allowance].
To Next Page
Loading...
Need help?
General