Omron CQM1 - Page 65

46
External Output Connection Cables Section 3-2
Connections Transmission Ready terminals are shorted when Transmission Ready status
occurs.
The ALM output terminals are shorted if an error occurs in the output of a Unit
with error detection function (G730-ROC04-A).
Example of external
output connections
G730 Interface Unit
Master
Transmission Ready output/ALM output
Max. switching capacity: 24 VDC/2 A
Min. switching capacity: 5 VDC/10 mA
Transmission
Ready output
to CQM1H/CQM1 Input Unit, etc.
Power
supply
Emergency stop circuit
To system control circuit
ALM output
Terminal screws: M3
(Optimum tightening torque: 0.5 N • m)