Omron E5EK - CHAPTER 3 BASIC OPERATION

CHAPTER 3 BASIC OPERATI ON
E5EK
3--1
CHAPTER 3
BASIC OPERATION
This chapter describes an actual example for understanding the basic
operation of the E5EK.
CHAPTER3
3.1 ConventionUsedinthisChapter 3-2........
3.2 Setting Input Specifications 3-4.............
Input type 3-4.............................
Scaling 3-4................................
3.3 Setting Output Specifications 3-6...........
Output assignments 3-6....................
Direct/reverse operation 3-7................
Control period 3-7.........................
3.4 Setting Alarm Type 3-9....................
Alarm type 3-9............................
Alarm value 3-9...........................
Alarm hysteresis 3-10.......................
Closeinalarm/openinalarm 3-10............
3.5 Protect Mode 3-12..........................
Security 3-12...............................
A/M key protect 3-12........................
3.6 Starting and Stopping Operation 3-13........
3.7 Adjusting Control Operation 3-14............
Changing the set point 3-14.................
Manual operation 3-14......................
Auto- t uning (A.T.) 3-16.....................