Omron NS Programming Manual

Section 2 NS Series Functions 2-5 Communications Address Settings
2-57
NS Series Programming Manual
1. Select the direct address (symbol) to be converted in the symbol table.
2. Double-click the address to display the Address Setting Dialog Box. Click the Input Tag Button.
Click here.
3. The host setting, data type, and I/O comment will be inherited if the host supports tags. If the host
does not support tags, the host will be changed to a host that support tags.
If the host before conversion
does not support tags, it will be
changed to support them.
The host setting before the
change will be inherited if the host
that was set before the change
supports tags.
4. Adjust the settings as required, and then click the OK Button.
5. The address will be converted to a tag.
Converted to
tag.
N
N
N
o
o
o
t
t
t
e
e
e
♦
Tags can be converted to direct addresses.

Omron NS Specifications

General

Brand	Omron
Model	NS
Category	Touch terminals
Language	English