Section 2 NS Series Functions 2-11 Multifunction Objects
2-178
NS Series Programming Manual
2-11-8 Detailed Settings for Each Function
Write Bit
The Write Bit function turns ON/OFF the specified communications address. Press the Write Button
and select Write Bit from the list that is displayed.
1
2
No. Item Details
1 Write Address Used to set the bit address to be written to.
2 Action Select the action from the following options: Momentary, Alternate, SET, and
RESET. Momentary action cannot be set if the operation timing is set to Touch
OFF timing or When a Value Changed.
N
N
N
o
o
o
t
t
t
e
e
e
♦
The actions for the Momentary, Alternate, SET, RESET, and Group Setting are the same as
ON/OFF Buttons.
♦
Group settings are enabled only when Momentary, Alternate, or SET button action is selected in
the property settings. If the action type is set to RESET, the button will not operate according to
group settings.
♦
If the button is set to Alternate and is pressed when ON, the button will turn OFF.
♦
This function is different from the group function executed by selecting Edit – Group – Group
from the menu bar or right-clicking and selecting Group from the pop-up menu.
♦
Set the same host address to buttons with the same group number. The buttons will not operate
normally if different host addresses are allocated.
To Next Page
Loading...
Need help?
General
