Omron NS Programming Manual

Section 3 Using PTs 3-6 Inputting Numeral and Character Strings
3-20
NS Series Programming Manual
3-6-2 Inputting Character Strings
Character strings are input using string display and input objects.
Inputting to String Display and Input Objects
There are two methods for inputting to string display and input objects: Input from a keypad and Input
from Command Buttons.
Inputting From a Keypad
1. In the string display and input property setting on the Keypad Tab Page, set either system keypad
or Large system keypad as the input method.
2. A keypad (virtual keyboard) will be displayed during operation when a string display and input ob-
ject is pressed.
List of Keyboards
Full keyboard Decimal key (unsigned) Hexadecimal key (unsigned)
Decimal key (signed) Hexadecimal key (signed) Decimal key (signed, with * and /)
Hexadecimal key
(signed, with * and /)

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)