Section 2 NS Series Functions 2-8 Common Functional Object Functions
2-78
NS Series Programming Manual
2-8-5 Date and Time Format (General Tab)
The display formats outlined below can be used for functional objects that display date and time. In
most cases, the date and time format is set on the General Tab Page.
1
2
3
4
No. Setting Details
1 Switch Switches labels.
The date and time display format can be set for each label.
2 Apply the
same value to
all labels
Applies the data display format and time display format to all of the selected labels. This
button can be used only when the ON Check Box for the data or time is selected.
This button cannot be used in the following cases.
• When the Date & Time Display Format Check Box is selected on the Edit/Disp Tab
Page in the Option Dialog Box accessed from the Tools – Option Menu Command
• When there is only one label
• When the ON Check Boxes for the data and time are cleared
3 Date Select the date display format from the list.
For some functional objects, you can select whether or not to display the date. For the
functional objects with that option, tick the check box to display the date.
4 Time Select the time display format from the list.
For some functional objects, you can select whether or not to display the time. For the
functional objects with that option, tick the check box to display the time.
To Next Page
Loading...
Need help?
General
