Section 2 NS Series Functions 2-12 Display and Input Objects
2-247
NS Series Programming Manual
N
N
N
o
o
o
t
t
t
e
e
e
♦
If the conditions are met at the same time for the When Changing Numeral macro and a
value-comparison macro (Value = Set Value, Value > Set Value, or Value < Set Value), the When
Changing Numeral macro will be given priority over the value-comparison macro.
Refer to NS-series Macro Reference in the CX-Designer for information on setting methods.
Size/Position Tab Page
Displays and sets the functional object size and position. Refer to Size/Position under 2-8 Common
Functional Object Functions for details.
2-12-2 String Display and Input
String display and input objects are functional objects that convert the contents of a specified address
to character string data and display that data. String display and input objects also convert data
through character string input from a barcode reader or virtual keyboard.
The string display and input object can be used for string display only (i.e., no input) by changing the
control flag settings.
abcd
Virtual keyboard input
Barcode input
abcd
abcd
Select Functional objects – String display & input or the
icon in CX-Designer to create a
string display and input object.
N
N
N
o
o
o
t
t
t
e
e
e
♦
The string display and input object can be used for string display only (i.e., no input) by changing
the control flag settings.
Input is enabled under the default control flag settings. The following procedure must be performed
to use the display-only function.
1. Display the String Display and Input Functional Object Properties Dialog Box.
2. Click Display Extension Tabs and select the displayed Control Flag Tab Page.
3. Select Disable under the Input.
To Next Page
Loading...
Need help?
General
