Omron NS Programming Manual

Section 2 NS Series Functions 2-8 Common Functional Object Functions
2-107
NS Series Programming Manual
Setting Passwords
Click the Set password Button on the Password Tab Page to set a password. Level 1 to level 5 pass-
words can be set. The set password is shared by all functional objects.
Operation of functional objects with set passwords will only be permitted if the password that matches
the password character string for the specified level is entered when the operation is received by the
object.
The password input keyboard can be specified from the pop-up window.
With PT system version 8.2 or higher, a user-created pop-up window can be used as the keyboard
screen for inputting the password character string. This allows the user to set the keyboard screens for
inputting passwords.
For each of the five password levels, the system keypad or a user-created pop-up window can be
specified for the keyboard, and the pop-up window to be used as a user-created keyboard can be set.
N
N
N
o
o
o
t
t
t
e
e
e
♦
Only the following objects can be placed on the password input keyboard.
• Command Buttons (Function selection: Key Button)
• Temporary Inputs (Function selection: Temporary Input Field)
• Label objects

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)