Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-172
NS Series Programming Manual
1. Move the mouse cursor to the Action Item List.
2. Right-click the mouse button and select Display Touch ON/OFF Condition from the pop-up menu
that is displayed.
3. Touch ON timing
and Touch OFF timing will be added to the action timing conditions.
N
N
N
o
o
o
t
t
t
e
e
e
♦
If the execution conditions are changed to Display Touch ON/OFF Condition, the following func-
tions will be set to Touch OFF timing.
Switch Screen (if not set to Pop-up page selection.)
Control Pop-up Screen
Display System Menu
Authentication Cancellation
♦
Key Button and Video Control – Vision Sensor Console Output can be set only for touch ON tim-
ing.
The settings for When pressing operation are outlined below.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)