Section 2 NS Series Functions 2-11 Multifunction Objects
2-219
NS Series Programming Manual
Authentication Cancellation
Cancels authentication when an authentication level has been set.
Press the Special Button and select Authentication Cancellation from the list that is displayed.
There are no settings required for the authentication cancellation function.
Confirmation Dialog Box
A confirmation message can be set to be displayed before execution of functions.
The functions set for execution after the confirmation dialog are executed only after the Yes Button has
been pressed in the confirmation dialog box. The functions set for execution after the confirmation dia-
log will not be executed if the No Button has been pressed in the confirmation dialog box.
For example, if the following settings are made, a confirmation message will be displayed after Write
Bit and Write Word are executed. If the Yes Button is pressed, the Write String and Switch Screen
functions will be executed. If the No Button is pressed, the Write String and Switch Screen functions
will not be executed.
1. Write Bit and Write Word are executed.
(Always executed before the confirmation message is
displayed.)
2. A confirmation message is displayed.
3. If the
Yes
Button is pressed, Write String and
Switch Screen are executed.
If the
No
Button is pressed, Write String and
Switch Screen are not executed.
N
N
N
o
o
o
t
t
t
e
e
e
♦
Refer to 2-8-14 Write Settings (Extension Tabs) for details on confirmation dialog boxes.
Press the Special Button and select Confirmation Dialog from the list that is displayed.
To Next Page
Loading...
Need help?
General
