Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-228
NS Series Programming Manual
Same Value
1
2
3
4
No. Item Details
1 Display
Address (1)
Sets the communications address for comparison with the Set Value.
2 Storage Format Select the storage format for the numeric value stored at the communications
address from the following.
• INT (signed, 1 word)
• UINT (unsigned, 1 word)
• DINT (signed, 2 words)
• UDINT (unsigned, 2 words)
• REAL (real number)
• BCD2 (unsigned, 1 words)
• BCD2 (unsigned, 2 words)
• BCD1 (signed (leftmost digit: F), 1 words)
• BCD1 (signed (leftmost digit: F), 2 words)
• BCD2 (signed (leftmost bit: 1), 1 words)
• BCD2 (signed (leftmost bit: 1), 2 words)
3 Direct Refer-
ence
Sets the value (set value) for comparison with the display address.
4 Indirect Refer-
ence
Sets a communications address for comparison with the display address.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)