Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-230
NS Series Programming Manual
The following items are displayed in the Color/Shape List. (The item names depend on the selected
combination of Shape and Display Method.)
Item Details
Frame Selected to make the frame settings.
The frame settings are made when shapes other than Polygon and Sector are selected.
Shape Selected to specify the shape file to be displayed.
The shape settings are made when Select Shape has been selected under Shape.
Color Selected to make the color settings.
The color settings are made when a selection other than Select Shape has been made under
Shape.
Line Selected to make the displayed line settings.
The line settings are made when Polygon and Sector are selected under Shape.
Shade Selected to make shade settings.
The line settings are made when Polygon and Sector are selected under Shape.
Angle Selected to make the start angle and end angle settings for sectors.
The angle settings are made when Sector has been selected under Shape.
Frame
Specifies the frame color and size and changes the shape and color of the button. Refer to Frames in
2-8 Common Functional Object Functions for details.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)