Omron NS Programming Manual

Preliminary Material Introduction
P-1
NS Series Programming Manual
Introduction
Thank you for purchasing an NS-series Programmable Terminal.
NS-series PTs are designed to transfer data and information in FA production sites.
The CX-Designer is a software package that enables creating and maintaining screen data for
OMRON NS-series Programmable Terminals.
Please be sure that you understand the functions and performance of the PT before attempting to use
it. When using an NS-series PT, please also refer to the NS Series Setup Manual and the CX-Designer
Online Help.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems into production facilities.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and connecting FA systems.
• Personnel in charge of managing FA systems and facilities.
Precaution
• The user must operate the product according to the performance specifications described in the op-
eration manuals.
• Do not use the PT touch switch input functions for applications where danger to human life or serious
property damage is possible, or for emergency switch applications.
• Before using the product under conditions which are not described in the manual or applying the
product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion sys-
tems, medical equipment, amusement machines, safety equipment, and other systems, machines
and equipment that may have a serious influence on lives and property if used improperly, consult
your OMRON representative.
• Make sure that the ratings and performance characteristics of the product are sufficient for the sys-
tems, machines, and equipment, and be sure to provide the systems, machines, and equipment with
double safety mechanisms.
• This manual provides information for connecting and setting up an NS-series PT. Be sure to read this
manual before attempting to use the PT and keep this manual close at hand for reference during in-
stallation and operation.
OMRON, 2002
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
an
y
form, or b
y
an
y
means, mechanical, electronic,
p
hotoco
py
in
g
, recordin
g
, or otherwise, without the
p
rior written
permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because
OMRON is constantly striving to improve its high-
q
ualit
y
p
roducts, the information contained in this manual is
sub
j
ect to chan
g
e without notice. Ever
y
p
recaution has been taken in the
p
re
p
aration of this manual. Nevertheless,
OMRON assumes no res
p
onsibilit
y
for errors or omissions. Neither is an
y
liabilit
y
assumed for dama
g
es resultin
g
from the use of the information contained in this publication.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)