Omron NS Programming Manual

Section 2 NS Series Functions 2-14 Alarms and Events
2-304
NS Series Programming Manual
No. Setting Details
13 Auto switch
contents
Sets whether or not automatic contents switching is enabled.
Automatically switch contents switching: ON
Do not automatic switch contents: OFF
14 Contents No. Sets the contents number that is displayed when an alarm/event occurs (0 to 9999).
15 Refer to the
String Table
Sets whether to reference a message character string from the character string table.
Reference the character string table: ON
Do not reference the character string table: OFF
16 String No. Sets the character string number of the referenced character string when a message
character string is referenced in a character string table.
Leave blank if the message character string will not be referenced in the character
string table.
17 Alarm message Sets the display message (up to 80 characters).
Leave blank if the message character string will be referenced in the character string
table.
18 Title The CX-Designer version information and the title for each item will be displayed in
lines one and two of the CSV file. Do not change or delete this information.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)