Omron NS Programming Manual

Section 2 NS Series Functions 2-14 Alarms and Events
2-318
NS Series Programming Manual
No. Setting Details
9 Movement when
Alarm/Event is Se-
lected
Select the operation when alarms/events are selected from the following three options.
Write the alarm ID to the specified address.
Writes the alarm ID number for the selected alarm/event to the specified address.
Switch Screen to the Specified Page set with an Alarm/Event Setting.
Switches the display to the Switch Screen No. set to the alarm event.
Switch to the Specified Contents set with an Alarm/Event Setting.
Switches the contents display to the contents for the contents number set to the alarm/event.
10 Display in the same
line
Sets whether to display the same alarm/event by date/time of occurrence or only the display
the latest alarm/event time, when the display order is set to From High Frequency/From Low
Frequency is selected and the display data is set to Alarm History.
If this checkbox is deselected, the same alarm/event will be displayed by date and time.
Example
The same alarm/event
is displayed by date of
occurrence.
If this checkbox is selected, only the most recent occurrence of each alarm/event will be dis-
played.
Example
Only the most recent
occurrence of each
alarm/event is displayed.
N
N
N
o
o
o
t
t
t
e
e
e
♦
If nothing is selected under Display type, there will be no alarm/event to display and nothing will be
displayed during PT operation.
♦
If the alarms/events during PT operation have the same level set under Default display order, they
will be displayed in the order they occurred.
♦
Alarm ID refers to the number set under PT - alarm/event setting - No. To set the data type (BCD or
binary) for the specified address, select PT – Project Properties and set the data type on the Data
Format Tab Page.
♦
Sometimes not all information can be displayed on the screen, depending on the set number of
message characters or display items.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)