Omron NS Programming Manual

Section 1 Overview 1-4 System Configuration
1-28
NS Series Programming Manual
Note 4: General-purpose color printers cannot be connected directly to NS5-SQ0@(B)-V@, NS5-TQ0@(B)-V@, or
NS5-MQ0@(B)-V@ PT.
Note 5: Refer to the Setup Manual (Cat. No. V083) to connect the PT and computer with a USB cable.
Note 6: A monitor can be connected only to the NS15-TX01S.
PTs (Refer to the appendices in the NS Series Setup Manual.)
Recommended Bar Code Readers (Refer to 3-4 Connecting to Bar Code Readers in the NS Se-
ries Setup Manual.)
OMRON V520-RH21-6/V400-H111/V400-H211 Bar Code Reader
RS-232C/RS-422A Converter (Refer to the appendices in the NS Series Setup Manual.)
OMRON NS-AL002 Converter
Recommended Memory Cards (Refer to 3-6 Using Memory Cards in the NS Series Setup Man-
ual.)
Model Memory capacity Memory type
HMC-EF183 128-MB Flash memory
HMC-EF283 256-MB Flash memory
HMC-EF583 512-MB Flash memory
CX-Designer (Refer to 3-3 Connecting the CX-Designer in the NS Series Setup Manual.)
OMRON CX-Designer
NS-CXDC1-V@ CX-Designer (CD-ROM)
Video Input Unit (Refer to section 3-7 in the NS Series Setup Manual.)
OMRON NS-CA001
Controller Link Interface Unit (Refer to section 5-2 in the NS Series Setup Manual.)
OMRON NS-CLK21
USB-compatible Printer (Refer to the 3-5 Connecting to Printers in the NS Series Setup Man-
ual.)

Omron NS Specifications

General

Brand	Omron
Model	NS
Category	Touch terminals
Language	English