Preliminary Material Notation and Terminology
P-3
NS Series Programming Manual
Terminology
PT In this manual, indicates an NS-series Programmable Terminal.
NS Series
Indicates products in the OMRON NS@@ Series of Programmable Terminals.
PLC Indicates Programmable Controllers in the OMRON SYSMAC CS/CJ, C, or
CVM1/CV Series of Programmable Controllers.
CS Series Indicates Programmable Controllers in the OMRON SYSMAC CS Series of
Programmable Controllers: CS1G, CS1H, CS1G-H, or CS1H-H
CJ Series Indicates Programmable Controllers in the OMRON SYSMAC CJ Series of
Programmable Controllers: CJ1G, CJ1G-H, CJ1H-H, CJ1M, CP1H, CP1L,
CJ2H
References to “CJ1H-H” in this manual indicate the CJ1H-CPU@@H-R and
CJ1H-CPU@@H. References to “CJ1H-H-R” indicate the CJ1H-CPU@@H-R.
“CJ2” is used when referring specifically to only the CJ2 CPU Units.
C Series Indicates Programmable Controllers in the OMRON SYSMAC C Series of Pro-
grammable Controllers: C200HS, C200HX/HG/HE-E/-ZE, CQM1, CQM1H,
CPM1A, CPM2A, CPM2C
CVM1/CV Series Indicates Programmable Controllers in the OMRON SYSMAC CV/CVM1 Se-
ries of Programmable Controllers: CV500, CV1000, CV2000, CVM1
Serial Communications Unit Indicates a Serial Communications Unit for an OMRON CS/CJ-series PLC.
Serial Communications Board Indicates a Serial Communications Board for an OMRON CS-series or CQM1H
PLC.
Communications Board Indicates a Communications Board for an OMRON C200HX/HG/HE-E/-ZE
PLC.
CPU Unit Indicates a CPU Unit in the OMRON SYSMAC CS/CJ, C, or CVM1/CV Series
of Programmable Controllers.
CX-Designer
Indicates the OMRON CX-Designer (NS-CXDC1-V@).
Host Indicates the PLC, FA computer, or personal computer functioning as the con-
trol device and interfaced with the NS-series PT.
Setup Manual Unless otherwise indicated, indicates the NS Series -V1/-V2 Setup Manual
(V083-E1-0@).
To Next Page
Loading...
Need help?
General
