About this Manual
This manual is divided into the chapters described in the following table. Information is organized by
application area to enable you to use the manual more efficiently.
Chapter Contents
Chapter 1 Overview Describes features and nomenclature. Also describes new functions.
Chapter 2 Installation Provides information required for system design, such as product
dimensions, installation dimensions, peripheral device design
information, and peripheral device selection information.
Chapter 3 Preparing for Operation Describes nomenclature, Digital Operator procedures, such as key
operations, for operating and monitoring Inverters, and mode contents
and configuration.
Chapter 4 Trial Operation Describes the method for controlling operation through a Digital
Operator to perform trial operation of the system.
Chapter 5 Basic Operation Describes basic Inverter control functions for users not familiar with
Inverters. The functions that must be understood to drive a motor with
an Inverter are described. Each of the four control modes of the
3G3FV-series Inverters is described in order alone with the settings
required for all modes and individual modes. Refer to the information
for all control modes and then to items required for the control mode
you will be using.
Chapter 6 Advanced Operation Describes all of the functions provided by the Inverter. These functions
will enable more advanced applications, and includes functions that
will improve motor control through the Inverter, such as
responsiveness (torque characteristics), increasing speed accuracy,
PID control, torque limits, torque controls, overtorque detection,
protective functions, and other functions. Each of the four control
modes of the 3G3FV-series Inverters is described in order alone with
the characteristics of each mode and fountains common to all modes.
Refer to the information for all control modes and then to items
required for the control mode you will be using.
Chapter 7 List of Parameters Lists basic information on Inverter parameters as a reference for users
already familiar with Inverter operation. Parameters are listed in order
with the page numbers of further information for easy reference.
Chapter 8 Maintenance Operations Provides maintenance, inspection, fault analysis, and troubleshooting
information required to deal with problems that may occur during
operation.
Chapter 9 Specifications Provides Inverter specifications, as well as the specifications and
dimensions of peripheral devices.
To Next Page
Loading...
Need help?
General