4-4
10. Operation
Basic
Operation: Operation based on the basic settings required to start and stop the Inverter
. Refer
to page 5-2.
Applied Operation: Operation which uses PID control or other functions. Refer to page 6-1.
For operation within standard parameters select “Basic Operation.”
To
use the various applied functions such as, direct current control braking, speed search, timer
,
S-curve acceleration/deceleration, slip correction, torque compensation, drip control, position
lock, and torque control, select “Applied Operation” in combination with “Basic Operation.”
Trial Operation Chapter
4
To Next Page
Loading...
