Omron SYSDRIVE 3G3FV

7-2
This sections lists all parameters that can be used in the Program and Initialize modes.
H Using the Lists
Para
meter
Name
Description Setting
range
Default
setting
Chan-
ges
Control mode
Page
meter
No.
Display
name
range setting ges
during
opera-
tion
V/f
control
V/f
with
PG
Open
loop
vector
Flux
vector
A1-00
Display
Language
Used to select the language
displayed on the Digital
Operator
0: English
1: Japanese
2: German
3: French
0 to 6 1 OK Q Q Q Q 3-18
Select
Language
3
:
F
renc
h
4: Italian
5: Spanish
6: Portuguese
Note:
This parameter is not ini -
tialized by the initialize
operation.
Parameter No. The parameter number.
Name The parameter name.
Display name The parameter name displayed on the Digital Operator.
Description Details of the parameter function or setting value.
Setting range The parameter setting range.
Default setting The
default setting value (each control mode has its own default setting. There -
fore the default setting changes when the control mode is changed.)
Changes during operation Indicates whether or not the parameter can be changed while in the In -
verter is in operation.
OK: Changes possible during operation.
NO: Changes not possible during operation.
Control mode Indicates which control modes and which access levels can be set and refer-
enced.
Q:
Items which can be set and referenced on all access levels; QUICK-ST ART,
BASIC, and ADVANCED.
B: Items which can be set and referenced in BASIC and ADVANCED.
A: Items which can be set and referenced in ADVANCED only.
X: Items which cannot be set or referenced in that control mode.
Page Reference page for more detailed information on the parameter.
Parameter Lists Chapter 7