Omron SYSDRIVE 3G3FV

3-9
H Setting the Parameter in the Advanced Access Level
The group level will be displayed when the Enter Key is pressed at the program mode display.
Key sequence Display Explanation
** Main Menu **
Operation
Displays operation mode.
2 times
** Main Menu **
Programming
Displays program mode.
Group b
Application
Puts the Unit in program mode.
Displays the Group b Application group selection.
Group C
Tuning
Displays the Group C Tuning group selection.
Function C1
Accel/Decel
Displays the C1 Accel/Decel function selection.
Accel Time 1
c1-01= 10.0 Sec
Displays C1-01 Acceleration time 1.
Accel Time 1
0010.0 Sec
Selects the parameter so that the leading 0 flashes.
(The digit that can be changed flashes.)
2 times
Accel Time 1
0010.0 Sec
Moves the cursor so that the “1” digit flashes.
Accel Time 1
0020.0 Sec
Changes the 1 to a 2.
Entry Accepted
Writes the new setting.
--- Accel Time 1
c1-01= 20.0 Sec
Returns to the C1-01 Acceleration time 1 display.
Function C1
Accel/Decel
Returns to the C1 Accel/Decel function selection.
Preparing for Operation Chapter 3