Oracle SPARC M8 User Manual

Verify the PCIe Card
/SYS/CMIOU9/PCIE2/IOVFC.PF0.VF2 VF pci_45 ldg4
/SYS/CMIOU9/PCIE2/IOVFC.PF0.VF3 VF pci_45 ldg4
In this example, the virtual functions listed under the TYPE column now displays a domain
name.
Related Information
■
Oracle VM Server for SPARC documentation (http://www.oracle.com/goto/vm-sparc/docs)
■
“Prepare a PCIe Card For Removal” on page 151
Verify the PCIe Card
Note - Always update PCIe card firmware to the latest supported version. Refer to the PCIe
card documentation for the firmware update instructions.
1.
Verify that the Fault LED is not lit and that the green Power LED is lit on the card
that you installed.
See “PCIe Card Carrier LEDs and Controls” on page 149.
2.
At a terminal, use the hotplug command to ensure that the card is connected.
For example:
# hotplug list /SYS/CMIOU0/PCIE1
[/SYS/CMIOU0/PCIE1] ENABLED
network@0 <pci.0,0> ONLINE
network@0,1 <pci.0,1> ONLINE
network@0,2 <pci.0,2> ONLINE
network@0,3 <pci.0,3> ONLINE
Related Information
■
“Identify Faulted Components” on page 36
■
“Interpreting LEDs” on page 44
164 SPARC M8 and SPARC M7 Servers Service Manual • September 2017

Oracle SPARC M8 Specifications

General

Brand	Oracle
Model	SPARC M8
Category	Server
Language	English