Oracle SPARC M8 User Manual

Locate the Server
a.
Locate the manufacturing sticker on the front of the server or on the sticker
on the side of the server.
b.
At the Oracle ILOM prompt, type:
-> show /System serial_number
/System
Properties:
serial_number = AK00239918
->
Related Information
■
“Locate the Server” on page 61
Locate the Server
1.
At the Oracle ILOM prompt, type:
-> set /System locator_indicator=on
Set 'locator_indicator' to 'on'
The white Locator LEDs (one on the front panel and one on the rear panel) blink.
2.
After locating the server with the blinking Locator LED, turn it off by pressing the
Locator button.
Note - Alternatively, you can turn off the Locator LED by setting the value to off.
Related Information
■
“Interpreting LEDs” on page 44
Prevent ESD Damage
Many components housed within the chassis can be damaged by ESD. To protect these
components from damage, perform the following steps before opening the chassis for service.
1.
Prepare an antistatic surface to set parts on during the removal, installation, or
replacement process.
Preparing for Service 61

Oracle SPARC M8 Specifications

General

Brand	Oracle
Model	SPARC M8
Category	Server
Language	English