Parker Hannifin
P series User Guide 184
Store drive specific parameters
Table 99. Store Parameters
Store the drive parameters in the memory. To prevent mistakes, using the ASCII code
corresponding to ‗Store‘ at the relevant sub index will store the parameters.
0x65 0x73
M SB LSB16 15
0x610x76
e s
av
ASCII 서 서
Writing ―Store‖ at SubIndex 1 will store all parameters.
Writing ―Store‖ at SubIndex 2 will store only communication parameter (0x1000~)
Writing ―Store‖ at SubIndex 3 will store only parameter (0x6000~).
Writing ―Store‖ at SubIndex 4 will store only the drive‘s specific parameter (0x2000~)
Writing ―Store‖ at SubIndex 5 will store only Index parameter (0x3000~).
Restore Default Parameters
Restore communication parameters
Restore CiA402 parameters
Restore drive specific parameters