Philips IntelliVue MX800 - 1 Average - column of averaged values; 2 Unit column; 3 Continuously measured numeric; 4 Prompt message field

12 Monitoring Cardiac Output
195
1
Average - column of averaged values
2 Unit column
3 Continuously measured numeric
4 Prompt message field
5 Thermodilution curve of current trial
6 Curve alert message field
7 Current trial number
8 Setup information
9 Trial numbers for the trial curves
10 Trial curves
11 Results table of current trial
12 Trial curve scale
• To change the measurement parameters shown in the results table of the procedure window, select
the
Table Contents pop-up key and choose from the list of available parameters.
• To view the currently-used temperature unit, see the "grayed-out" setting
Temperature Unit in the
Setup C.O. menu. This setting can only be changed in Configuration Mode.
• The Cardiac Output screen element may be configured to display permanently on a specially
designed Screen. Selecting the screen element opens the cardiac output pop-up keys.
Accessing the Setup C.O. and Setup CCO Menus
C.O. settings can be changed in the Setup C.O. menu. To access this menu,
• press the C.O. hard key on the C.O. module, or
• select any of the discontinuous C.O. numerics (for example, C.O., C.I.) on the screen.