26 Printing Patient Reports
327
2
Select Report Type and then select the reports template you want the report selected in Step 2 to
use. The selection of templates listed depends on the report type selected.
Each template includes patient demographic data, and each Realtime Report also includes alarm
and INOP information. In addition, the templates include:
VisibleWaves: all waves currently visible, in the order they appear on the screen.
All Waves: all measured waves.
RT Waves: all currently measured realtime waves, according to the monitor's priority list.
HiRes Waves: all measured HiRes waves.
OxyCRG Waves: the OxyCRG/Neonatal Event Review waves.
Vital Signs: trend information in tabular form.
Graph Trend: trend information in graphic form.
ECG reports:
ECG3X4, ECG6X2, ECG12X1, ECG4X2, ECG8X1,ECG12X1 (2P)
EEG reports: EEG Report.
Episode: a single patient event episode.
Review: an overview of patient events
Alarm Limits: a list of all currently set alarm limits.
3 Select Report Size to set the paper size to be used for the report: Unspecified to use the default
size for the template chosen,
Universal, A4, Letter, LrgUniversal, A3, or Ledger. The list of
available sizes depends on the report type selected.
4 Select Orientation to set the orientation of the report printout: Unspecified to use the default size
for the template chosen,
Landscape or Portrait.
5 Select Target Device and choose which printer the print job will be sent to: Unspecified to use
the default printer, or choose from the list of printer names defined at the Information Center or
in the monitor's Configuration Mode (for example,
Remote 1 or Database).
Some settings may be inactive ("grayed-out") in this menu for reports that can only be started in a
special window.
Checking Printer Settings
The printer settings for your monitor are defined in Configuration Mode. The printer settings Paper
Size
, Resolution, Color Support, and Duplex Option for the active printer are visible but inactive
("grayed-out") in the
Setup Printers menu. When Print Database is selected as active printer only the
Paper Size setting will be shown.
To enter the
Setup Printers menu, in the Reports menu, select Setup Printers.
Printer names for locally-connected printers can be defined in Configuration Mode. You can see
whether a specified printer is centrally or locally connected in the
Setup Printers menu under Port. If
"Local" is included in the port name, e.g.
Local 2, that indicates locally-connected printers, and
"Remote", e.g.
Remote 1, indicates centrally-connected printers.
Printing a Test Report
A test report can be printed in Configuration mode, refer to the Service Guide for details.
To Next Page
Loading...