32
359
32Laboratory Data
Laboratory data can be entered manually at the Information Center or at the monitor. For details on
manual entry at the monitor, see “Entering Measurements Manually” on page 40. Selected laboratory
data can be integrated on the monitor - values are then stored in the database and included in trends
and reports and can be displayed as a numeric on the main screen. Which data can be stored and used
on the monitor in this way is selected in Configuration Mode.
Viewing Received Data
When new data has been received from the Information Center a New Lab Data received. Check Lab
Results Window.
message will appear with the arrival time. To view the data, select Main Setup then
select
Lab Results or the Lab Results SmartKey.
The
Lab Results window shows the most recent set of data received. The data is grouped into
categories:
•
Blood Gases
• Electrolytes
• Hematology
• Metabolites
• Chemistry
• Enzymes/Markers
• Coagulation
• Urine Diagnostics
If no results are available for a particular category, that category will not be shown. Values which were
entered manually at the Information Center will be marked with an asterisk (*).
To Next Page
Loading...