1 Introduction
23
Selecting Screen Elements
Select a screen element to tell the monitor to carry out the actions linked to the element. For example,
select the Patient Identification element to call up the
Patient Demographics window, or select the
HR numeric to call up the
Setup ECG menu. Select the ECG wave segment to call up the ECG Lead
menu.
Note that the space between each line of a menu may be configured to wide or narrow to facilitate
your most common method of operation, either touch, remote control or a pointing device such as a
mouse.
Monitor information line Other screen elements
1
network connection indicator
(documented in Information
Center Instructions for Use)
10
alarm status area - shows active alarm messages
2
bed label
11
status line - shows information messages and prompting you for action
3
patient identification
12
close all open menus and windows and return to main screen
4
patient category
13
enter Main Setup menu
5
paced status
14
scroll right to display more SmartKeys
6
date and time
15
SmartKeys - these change according to your monitor's configuration
7
access the Profiles menu
16
scroll left to display more SmartKeys
8
current screen name/enter
Change Screen menu
17
Pause Alarms - pauses alarm indicators. Pause duration depends on monitor
configuration. If pause duration is infinite, this key is labeled Alarms Off. Select again
to immediately re-enable alarm indicators.
9
adjust alarm volume/level
indicator
18
Silence - acknowledges all active alarms by switching off audible alarm indicators and
lamps permanently or temporarily, if alarm reminder (ReAlarm) is configured on.
To Next Page
Loading...