Chapter 1 Introduction 25
Chapter 14, System Component Descriptions describes the PI-MAX Camera,
the ST-133, and other system components. Includes descriptions of connectors
and other front and rear panel features.
Chapter 15, Troubleshooting provides information regarding possible system
problems.
Appendix A, Specifications provides general specifications as well as operating
environment and internal pulser specifications.
Appendix B, Outline Drawings includes outline drawings for the ST-133A
Controller, the ST-133B Controller, and the PI-MAX camera.
Appendix C, Software explains how the PI-MAX camera is controlled using the
WinX application software.
Appendix D, C-Mount and F-Mount Adapters provides information on the
C-Mount and F-Mount adapters available for the PI-MAX Camera. Also includes
a discussion of lens focusing.
Appendix E, Spectroscopy-Mount and Spectrograph Adapters provides
mounting instructions for the spectroscopy-mount adapter and for the
spectrograph adapters available for PI-MAX cameras with spectroscopy-mounts.
Appendix F, IVUV Detector discusses the purge requirements of the IVUV
variant of the PI-MAX.
Appendix G, USB 2.0 Limitations covers the currently known limitations
associated with operating under the USB 2.0 interface.
Appendix H, Glossary provides definitions of commonly used words and terms
related to intensified camera characteristics and usage.
Declarations of Conformity contains the Declarations of Conformity for PI-MAX
systems.
Warranty & Service details the warranties for Princeton Instruments equipment
and software.
To Next Page
Loading...
