PRÜFTECHNIK ROTALIGN Ultra iS - Chapter 7: Updating ROTALIGN Ultra Firmware; 7.1 Updating Firmware to a Higher Version

ROTALIGN
®
Ultra iS Shaft handbook
170
Jack bolts or other mechanical or hydraulic adjustment methods are recommended for
best results. Tighten down the anchor bolts, then press
e to conclude the horizontal
alignment procedure.
6.4.8 Final check
Press
m and take another set of readings in order to confirm the alignment condition.
Remove the components from the shaft before switching on the machine!

WARNING
Remove the components
f
rom the sha
f
t be
f
ore switching on the machine!