183
8.1.6 RFID options
The “RFID options” screen is used to access the options required when applying
ROTALIGN Ultra iS RFID functionality.
8.1.7 Bluetooth options
The primary use of the “Bluetooth options” screen is to connect (aka pairing)
Bluetooth devices to the ROTALIGN Ultra iS computer. When connected (or paired),
measurement reports may be sent from the ROTALIGN Ultra iS computer to the
Bluetooth device (which could be a smartphone or a tablet PC).
The screen is also used to enable or disenable the ROTALIGN Ultra iS computer
Bluetooth capabilities. When in the Bluetooth options screen, press
q to reveal the
context menu items, then use
f/g and highlight the item ‘Bluetooth OFF’.
For details on using RFID
with ROTALIGN Ultra iS
Shaft please refer to the
RFID Guide DOC 04.600.
en.
The functions of the “RFID
options” screen icons are
self-explanatory. These
are accessed using the
navigation keys, then
confirming selection by
pressing
e.
Use f/g and
highlight ‘Scan for new
Bluetooth devices’. Confirm
selection by pressing
e.
Any detected Bluetooth
device will be listed on the
screen and measurement
reports may be transferred
to the device when enabled.
Configuration
To Next Page
Loading...
Need help?
General
