PRÜFTECHNIK ROTALIGN Ultra iS - Carrying out the Firmware Update

ROTALIGN Ultra iS Shaft handbook
172
2. Select the location of the memory stick with ‘Browse’, then click ‘Install’. The
files extraction process begins.
3. If the extraction has been successful, the update is now on the memory stick.
Proceed to section 7.1.3 – ‘Carrying out the firmware update’.
7.1.3 Carrying out the firmware update
Before starting the update verify that your memory stick has the files shown below in
the ‘Ultra’ directory.
1. Connect the ROTALIGN Ultra iS computer to the mains adapter/charger, or
ensure that the rechargeable battery is fully charged.
2. Switch ROTALIGN Ultra iS computer on and wait for Program Manager screen to
appear.
Note that this folder
name corresponds to the
downloaded firmware
version.
Note that this folder is
empty but necessary.