173
Firmware update
3. Attach the ‘short’ USB/peripheral devices cable ALI 12.503 to the ROTALIGN
Ultra iS .
4. Insert the approved PRÜFTECHNIK memory stick ALI 4.451 into the ‘short’ USB
cable.
5. On inserting the memory stick, ROTALIGN Ultra beeps and all 4 alignment
condition LEDs blink followed by the next screen below
Approved memory stick
inserted in the ‘short’ USB
cable ALI 12.503 which is
connected to the ROTALIGN
Ultra iS computer.
To Next Page
Loading...
