PRÜFTECHNIK ROTALIGN Ultra iS User Manual

107
5.2.7 IntelliEXTEND
This feature automatically activates the extension of the measurement range while in
IntelliSWEEP measurement mode. This range extension allows the adjustment of the
laser beam such that it does not miss the detector surface when measuring shafts
with gross misalignment or small angular misalignment over large distances. This
feature is available only in the Advanced and Expert ROTALIGN Ultra iS Shaft levels.
IntelliEXTEND is available only in ‘IntelliSWEEP’ measurement mode.
1. When taking measurement using intelliSWEEP and the laser beam approaches
the end of the detector surface, a hint automatically appears on the display.
2. When the hint appears, use
i/h to highlight ‘Yes’ the confirm selection by
pressing
e.
3. Follow the hints on the display and center the laser beam using the yellow beam
position thumbwheels.
Note that ‘IntelliEXTEND’
is available in Advanced
and Expert Shaft levels
only.
Note
Inte
ll
iEXTEND is avai
l
a
bl
e on
ly
in ‘Inte
ll
iSWEEP’ measurement mo
d
e.
IntelliEXTEND

PRÜFTECHNIK ROTALIGN Ultra iS Specifications

General

Brand	PRÜFTECHNIK
Model	ROTALIGN Ultra iS
Category	Laser Shaft Alignment Tools
Language	English