PRÜFTECHNIK ROTALIGN Ultra iS User Manual

ROTALIGN Ultra iS Shaft handbook
202
With the context menu displayed, use f/g to highlight the item ‘Delete’.
Confirm selection by pressing
e. A message pops up requesting confirmation if the
file should actually be deleted. Use
i/h to highlight ‘Yes’, then confirm selection by
pressing
e. The template is deleted from the templates list.
8.5 Available applications and options
The following applications and options can be selected via the program manager start
screen.
i) Resume – Depending on the set customization option, the resume option loads a
default template or the most recent job.
ii) Shaft Alignment – used to position the centerlines of rotation of two (or more)
machinery shafts in line with each other.
iii) Straightness – used to measure straightness.
iv) Flatness – used to determine levelness and flatness of surfaces.
v) Bore Alignment – used for bore and turbine alignment.

PRÜFTECHNIK ROTALIGN Ultra iS Specifications

General

Brand	PRÜFTECHNIK
Model	ROTALIGN Ultra iS
Category	Laser Shaft Alignment Tools
Language	English