PRÜFTECHNIK ROTALIGN Ultra iS User Manual

ROTALIGN Ultra iS Shaft handbook
80
d) Use the navigation keys to select language and type of report to be printed. The
title bar shows the printer to which the report will be printed.
If the available printer has not been configured or if the printer configuration
requires setting, use the “Report” screen context menu item ‘Print via settings’.
e) With the context menu item ‘Print via settings’ highlighted, press
e then
proceed to select the available printer from the printer name drop down menu.
In this example, the
selected printer is ‘PDF
Printer’. This option is
used to save the report as
a PDF file. In this case, the
printer settings must be
configured to match the
available printer.
Note that if the available
printer has been
configured correctly,
pressing
e prints
report.
Use
h/i to switch
between the two panes.
Use
f/g to select
the required report format
and language. Item selected
from any pane appears in
blue when the opposite
pane is highlighted.
Note
If the available printer has not been confi
g
ured or if the printer confi
g
uration
requires setting, use t
h
e “Report” screen context menu item ‘Print via settings’.
Refer to section 8.1.7 for
pairing Bluetooth devices
to the ROTALIGN Ultra iS
computer.
The context menu item
‘Send PDF report’ is used to
send the PDF report to other
external Bluetooth devices
such as mobile smart
devices and PCs. To be able
to send a report to the
smart device, it must first be
paired with the ROTALIGN
Ultra iS computer.

PRÜFTECHNIK ROTALIGN Ultra iS Specifications

General

Brand	PRÜFTECHNIK
Model	ROTALIGN Ultra iS
Category	Laser Shaft Alignment Tools
Language	English